July 20, 2026
Choosing the wrong check valve suppliers costs more than the price difference between a good supplier and a bad one. Failed valves in pump discharge lines, […]
Blog
July 17, 2026
Standard globe valves leak from the stem. Not immediately. Over time. The packing that seals the stem wears down with each operation. Eventually it leaks. A […]
July 16, 2026
Fluid corrodes carbon steel. Simple as that. When it does, the specification shifts to a stainless steel globe valve. Corrosive chemicals. High-purity process lines. Cryogenic temperatures. […]
July 15, 2026
A y pattern globe valve positions the stem and seat at an angle to the pipe centerline, typically 45 to 60 degrees. Not perpendicular to it. […]
July 14, 2026
Chinese check valve manufacturers supply the majority of the world’s industrial check valve volume. Lower production costs, broad material capability, and established export infrastructure make China […]
July 13, 2026
Check valve backflow happens when fluid reverses direction through a check valve that should have prevented it. Wrong valve type for the application. Worn seat or […]
July 10, 2026
Check valve cracking pressure is the minimum upstream pressure required to open a check valve disc off its seat and allow flow to begin. Below that […]
July 9, 2026
A tilting disc check valve prevents backflow using a disc that pivots around a pivot point located above the centerline of the valve bore. That pivot […]
July 8, 2026
A dual plate check valve and a swing check valve both prevent backflow. That is where the similarity ends. Different closure mechanism. Different footprint. Different pressure […]