July 17, 2026
Quick Answer A bellows sealed globe valve uses a welded metal bellows as its primary stem seal, replacing the compression packing found in standard valves. This […]
Blog&News
July 16, 2026
Quick Answer Stainless steel globe valves are required over carbon steel for corrosive fluids, high-purity processes, and cryogenic temperatures below -29°C, where carbon steel becomes brittle. […]
July 15, 2026
Quick Answer A Y-pattern globe valve angles its stem and seat 45-60 degrees from the pipe, creating a single gentle flow path instead of the standard […]
July 14, 2026
Quick Answer Chinese check valve manufacturers supply most of the global market, offering lower costs and broad capabilities. Top suppliers like CTGV, Neway, and LIANGGU hold […]
July 13, 2026
Quick Answer Check valve backflow occurs when fluid reverses through a valve meant to prevent it, often due to wrong valve type, undersizing, worn parts, or […]
July 10, 2026
Quick Answer Check valve cracking pressure is the minimum upstream differential pressure required to lift the disc off its seat and initiate flow. It must be […]
July 9, 2026
Quick Answer A tilting disc check valve uses an offset pivot above the bore centerline, allowing the disc to tilt open with forward flow and close […]
July 8, 2026
Quick Answer A dual plate check valve and a swing check valve both prevent backflow but differ significantly in design, space, weight, and pressure drop. The […]
July 7, 2026
Quick Answer A spring-loaded check valve uses a spring to close its disc before flow reversal, preventing water hammer, unlike swing check valves that slam shut. […]