September 20, 2026
Quick Answer: There are two main categories for solenoid valve types: direct-acting and pilot-operated designs. Configurations include 2-way, 3-way, and 4-way models, built as normally open […]
Blog&News
September 18, 2026
Quick Answer The solenoid valve working principle demonstrates how the electromagnetic coil pulls a plunger, opening or closing a flow orifice within milliseconds.TG Valve applies automated […]
September 16, 2026
Quick Answer The various control valve types include globe valves, butterfly valves, V-port ball valves, diaphragm valves, and needle valves. The choice of control valve is […]
September 14, 2026
Quick Answer Needle valves are commonly used to adjust low flow rates in small-bore piping, with pressure ratings depending on the valve design, material, and operating […]
September 12, 2026
Quick Answer The three main pressure relief valve types are spring-loaded, pilot-operated, and direct-acting. The tolerances are set by ASME Section VIII and API 526 with […]
September 10, 2026
Quick Answer The world’s top knife gate valve manufacturers build to MSS SP-81 and test to API 598 or EN 12266 for slurry and solids isolation. […]
September 8, 2026
Quick Answer Plug valves and ball valves differ based on design and application. Plug valves use a tapered plug for tight shutoff in slurry and abrasive […]
September 5, 2026
Quick Answer CTGV ranks among the top plug valve manufacturers worldwide, backed by ISO 9001, ISO 14001, and API 609 certification. Other established suppliers include DeZURIK, […]
September 3, 2026
Quick Answer There are five main types of plug valves: lubricated, non-lubricated sleeve, eccentric, lift, and multi-port. Each type suits a different pressure, temperature, and media […]